[dspam-users] Clamav + Postfix + Dspam

Hi Eric can you tell me what im doing wrong with this

Hi All

Im having problems getting dspam to work with clamav

I have uncommencted the clamav stuff in dspam.conf And have installed
clamav. I can telnet into port 3310 but dspam doesn't seem to work as
the eicar test gets straight through. Are there any logs anywhere I can
check to see what is going on. I have clamav-0.88.2 installed on openbsd
3.9.

Thanks

Luke
Here is my dspam.conf file

## $Id: dspam.conf.in,v 1.72 2006/05/14 15:40:42 jonz Exp $ ##
dspam.conf -- DSPAM configuration file ##

#
# DSPAM Home: Specifies the base directory to be used for DSPAM storage
# Home /var/dspam

#
# StorageDriver: Specifies the storage driver backend (library) to use.
# You'll only need to set this if you are using dynamic storage driver
plugins.
# The default when one storage driver is specified is to statically
link. Be # sure to include the path to the library if necessary, and
some systems may # use an extension other than .so.
#
# Options include:
#
# libmysql_drv.so libpgsql_drv.so libsqlite_drv.so
# libsqlite3_drv.so libora_drv.so libhash_drv.so
#
# IMPORTANT: Switching storage drivers requires more than merely
changing # this option. If you do not wish to lose all of your data, you
will need to # migrate it to the new backend before making this change.
#
StorageDriver /usr/local/lib/libmysql_drv.so

#
# Trusted Delivery Agent: Specifies the local delivery agent DSPAM
should call
# when delivering mail as a trusted user. Use %u to specify the user
DSPAM is
# processing mail for. It is generally a good idea to allow the MTA to
specify
# the pass-through arguments at run-time, but they may also be specified
here.
#
# Most operating system defaults:
#TrustedDeliveryAgent "/usr/bin/procmail" # Linux
#TrustedDeliveryAgent "/usr/bin/mail" # Solaris
#TrustedDeliveryAgent "/usr/libexec/mail.local" # FreeBSD
#TrustedDeliveryAgent "/usr/bin/procmail" # Cygwin
#
# Other popular configurations:
#TrustedDeliveryAgent "/usr/cyrus/bin/deliver" # Cyrus
#TrustedDeliveryAgent "/bin/maildrop" # Maildrop
#TrustedDeliveryAgent "/usr/local/sbin/exim -oMr spam-scanned" # Exim
#
TrustedDeliveryAgent "/usr/sbin/sendmail"

#
# Untrusted Delivery Agent: Specifies the local delivery agent and
arguments
# DSPAM should use when delivering mail and running in untrusted user
mode.
# Because DSPAM will not allow pass-through arguments to be specified to

# untrusted users, all arguments should be specified here. Use %u to
specify
# the user DSPAM is processing mail for. This configuration parameter is
only
# necessary if you plan on allowing untrusted processing.
#
#UntrustedDeliveryAgent "/usr/bin/procmail -d %u"

#
# SMTP or LMTP Delivery: Alternatively, you may wish to use SMTP or LMTP

# delivery to deliver your message to the mail server. You will need to
# configure with --enable-daemon to use host delivery, however you do
not need
# to operate in daemon mode. Specify an IP address or UNIX path to a
domain
# socket below as a host.
#
# If you would like to set up DeliveryHost's on a per-domain basis, use
# the syntax: DeliveryHost.domain.com 1.2.3.4
#
#DeliveryHost 127.0.0.1
#DeliveryPort 24
#DeliveryIdent localhost
#DeliveryProto LMTP

#
# FallbackDomains: If you want to specify certain domains as fallback
domains,
# enable this option. For example, you could create a user @domain.com,
and
# if bob@domain.com does not resolve to a known user on the system, the
user
# could default to your @domain.com user. NOTE: This also requires
designating
# fallbackDomain for the domain name;
# e.g. dspam_admin ch pref domain.com fallbackDomain on
#
#FallbackDomains on

# Quarantine Agent: DSPAM's default behavior is to quarantine all mail
it
# thinks is spam. If you wish to override this behavior, you may specify
# a quarantine agent which will be called with all messages DSPAM thinks
is
# spam. Use %u to specify the user DSPAM is processing mail for.
#
#QuarantineAgent "/usr/bin/procmail -d spam"

#
# DSPAM can optionally process "plused users" (addresses in the
user+detail
# form) by truncating the username just before the "+", so all internal
# processing occurs for "user", but delivery will be performed for
# "user+detail". This is only useful if the LDA can handle "plused
users"
# (for example Cyrus IMAP) and when configured for LMTP delivery above
#
# NOTE: Plused detail presently only works when usernames are provided
and
# not fully qualified email address (@domain).
#
#EnablePlusedDetail on

#
# Quarantine Mailbox: DSPAM's LMTP code can send spam mail using LMTP to
a
# "plused" mailbox (such as user+quarantine) leaving quarantine
processing
# for retraining or deletion to be performed by the LDA and the mail
client.
# "plused" mailboxes are supported by Cyrus IMAP and possibly other
LDAs.
# The mailbox name must have the +
#
#QuarantineMailbox +quarantine

#
# OnFail: What to do if local delivery or quarantine should fail. If set
# to "unlearn", DSPAM will unlearn the message prior to exiting with an
# un successful return code. The default option, "error" will not
unlearn
# the message but return the appropriate error code. The unlearn option
# is use-ful on some systems where local delivery failures will cause
the
# message to be requeued for delivery, and could result in the message
# being processed multiple times. During a very large failure, however,
# this could cause a significant load increase.
#
OnFail error

# Trusted Users: Only the users specified below will be allowed to
perform
# administrative functions in DSPAM such as setting the active user and
# accessing tools. All other users attempting to run DSPAM will be
restricted;
# their uids will be forced to match the active username and they will
not be
# able to specify delivery agent privileges or use tools.
#
Trust dspam
Trust apache
Trust _postfix
Trust _postdrop
Trust root
Trust _clamav
Trust mail
Trust mailnull
Trust smmsp
Trust daemon
#Trust nobody
#Trust majordomo

#
# Debugging: Enables debugging for some or all users. IMPORTANT: DSPAM
must
# be compiled with debug support in order to use this option. DSPAM
should
# never be running in production with debug active unless you are
# troubleshooting problems.
#
# DebugOpt: One or more of: process, classify, spam, fp, inoculation,
corpus
# process standard message processing
# classify message classification using --classify
# spam error correction of missed spam
# fp error correction of false positives
# inoculation message inoculations (source=inoculation)
# corpus corpusfed messages (source=corpus)
#
#Debug *
#Debug bob bill
#
#DebugOpt process spam fp

#
# ClassAlias: Alias a particular class to spam/nonspam. This is useful
if
# classifying things other than spam.
#ClassAliasSpam badstuff
#ClassAliasNonspam goodstuff

#
# Training Mode: The default training mode to use for all operations,
when
# one has not been specified on the commandline or in the user's
preferences.
# Acceptable values are: toe, tum, teft, notrain
#
TrainingMode teft

#
# TestConditionalTraining: By default, dspam will retrain certain errors
# until the condition is no longer met. This usually accelerates
learning.
# Some people argue that this can increase the risk of errors, however.
#
TestConditionalTraining on

#
# Features: Specify features to activate by default; can also be
specified
# on the commandline. See the documentation for a list of available
features.
# If _any_ features are specified on the commandline, these are ignored.
#
# NOTE: For standard "CRM114" Markovian weighting, use sbph
#
#Feature sbph
#Feature noise
Feature chained
Feature whitelist

# Training Buffer: The training buffer waters down statistics during
training.
# It is designed to prevent false positives, but can also dramatically
reduce
# dspam's catch rate during initial training. This can be a number from
0
# (no buffering) to 10 (maximum buffering). If you are paranoid about
false
# positives, you should probably enable this option.
#Feature tb=5

#
# Algorithms: Specify the statistical algorithms to use, overriding any
# defaults configured in the build. The options are:
# naive Naive-Bayesian (All Tokens)
# graham Graham-Bayesian ("A Plan for Spam")
# burton Burton-Bayesian (SpamProbe)
# robinson Robinson's Geometric Mean Test (Obsolete)
# chi-square Fisher-Robinson's Chi-Square Algorithm
#
# You may have multiple algorithms active simultaneously, but it is
strongly
# recommended that you group Bayesian algorithms with other Bayesian
# algorithms, and any use of Chi-Square remain exclusive.
#
# NOTE: For standard "CRM114" Markovian weighting, use 'naive', or
consider
# using 'burton' for slightly better accuracy
#
# Don't mess with this unless you know what you're doing
#
#Algorithm chi-square
#Algorithm naive
Algorithm graham burton

#
# PValue: Specify the technique used for calculating PValues, overriding
any
# defaults configured in the build. These options are:
# graham Graham's Technique ("A Plan for Spam")
# robinson Robinson's Technique
# markov Markovian Weighted Technique
#
# Unlike algorithms, you may only have one of these defined. Use of the
# chi-square algorithm automatically changes this to robinson.
#
# Don't mess with this unless you know what you're doing.
#
#PValue robinson
#PValue markov
PValue graham

#
# SupressWebStats: Enable this if you are not using the CGI, and don't
want
# .stats files written.
#SupressWebStats on

#
# ImprobabilityDrive: Calculate odds-ratios for ham/spam, and add to
# X-DSPAM-Improbability headers
#ImprobabilityDrive on

#
# Preferences: Specify any preferences to set by default, unless
otherwise
# overridden by the user (see next section) or a default.prefs file.
# If user or default.prefs are found, the user's preferences will
override any
# defaults.
#
Preference "spamAction=quarantine"
Preference "signatureLocation=message" # 'message' or 'headers'
Preference "showFactors=on"
#Preference "spamAction=tag"
#Preference "spamSubject=SPAM"

#
# Overrides: Specifies the user preferences which may override
configuration
# and commandline defaults. Any other preferences supplied by an
untrusted user
# will be ignored.
#
AllowOverride trainingMode
AllowOverride spamAction spamSubject
AllowOverride statisticalSedation
AllowOverride enableBNR
AllowOverride enableWhitelist
AllowOverride signatureLocation
AllowOverride showFactors
AllowOverride optIn optOut
AllowOverride whitelistThreshold
AllowOverride localStore
# --- MySQL ---

#
# Storage driver settings: Specific to a particular storage driver.
Uncomment
# the configuration specific to your installation, if applicable.
#
MySQLServer /var/run/mysql/mysql.sock
MySQLPort
MySQLUser dspam
MySQLPass abcRp:
MySQLDb dspam
MySQLCompress true

# If you are using replication for clustering, you can also specify a
separate
# server to perform all writes to.
#
#MySQLWriteServer /var/lib/mysql/mysql.sock
#MySQLWritePort
#MySQLWriteUser dspam
#MySQLWritePass changeme
#MySQLWriteDb dspam_write
#MySQLCompress true

# If your replication isn't close to real-time, your retraining might
fail if
# the signature isn't found. One workaround for this is to use the
write
# database for all signature reads:
#
#MySQLReadSignaturesFromWriteDb on

# Use this if you have the 4.1 quote bug (see doc/mysql.txt)
#MySQLSupressQuote on

# If you're running DSPAM in client/server (daemon) mode, uncomment the
# setting below to override the default connection cache size (the
number
# of connections the server pools between all clients). The connection
cache
# represents the maximum number of database connections *available* and
should
# be set based on the maximum number of concurrent connections you're
likely
# to have. Each connection may be used by only one thread at a time, so
all
# other threads _will block_ until another connection becomes available.
#
#MySQLConnectionCache 10

# If you're using vpopmail or some other type of virtual setup and wish
to
# change the table dspam uses to perform username/uid lookups, you can
over-
# ride it below

#MySQLVirtualTable dspam_virtual_uids
#MySQLVirtualUIDField uid
#MySQLVirtualUsernameField username

# UIDInSignature: MySQL supports the insertion of the user id into the
DSPAM
# signature. This allows you to create one single spam or fp alias
# (pointing to some arbitrary user), and the uid in the signature will
# switch to the correct user. Result: you need only one spam alias

MySQLUIDInSignature on

# --- PostgreSQL ---

#PgSQLServer 127.0.0.1
#PgSQLPort 5432
#PgSQLUser dspam
#PgSQLPass changeme
#PgSQLDb dspam

# If you're running DSPAM in client/server (daemon) mode, uncomment the
# setting below to override the default connection cache size (the
number
# of connections the server pools between all clients).
#
#PgSQLConnectionCache 3

# UIDInSignature: PgSQL supports the insertion of the user id into the
DSPAM
# signature. This allows you to create one single spam or fp alias
# (pointing to some arbitrary user), and the uid in the signature will
# switch to the correct user. Result: you need only one spam alias

#PgSQLUIDInSignature on

# If you're using vpopmail or some other type of virtual setup and wish
to
# change the table dspam uses to perform username/uid lookups, you can
over-
# ride it below

#PgSQLVirtualTable dspam_virtual_uids
#PgSQLVirtualUIDField uid
#PgSQLVirtualUsernameField username

# --- Oracle ---

#OraServer
"(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNEC
T_DATA=(SID=PROD)))"
#OraUser dspam
#OraPass changeme
#OraSchema dspam

# --- SQLite ---

#SQLitePragma "synchronous = OFF"

# --- Hash ---

# HashRecMax: Default number of records to create in the initial segment
when
# building hash files. 100,000 yields files 1.6MB in size, but can fill
up
# fast, so be sure to increase this (to a million or more) if you're not
using
# autoextend.
#
# Primes List:
# 53, 97, 193, 389, 769, 1543, 3079, 6151, 12289, 24593, 49157, 98317,
196613,
# 393241, 786433, 1572869, 3145739, 6291469, 12582917, 25165843,
50331653,
# 100663319, 201326611, 402653189, 805306457, 1610612741, 3221225473,
# 4294967291
#
HashRecMax 98317

# HashAutoExtend: Autoextend hash databases when they fill up. This
allows
# them to continue to train by adding extents (extensions) to the file.
There
# will be a small delay during the growth process, as everything needs
to be
# closed and remapped.
#
HashAutoExtend on

# HashMaxExtents: The maximum number of extents that may be created in a
single
# hash file. Set this to zero for unlimited
#
HashMaxExtents 0

# HashExtentSize: The record size for newly created extents. Creating
this too
# small could result in many extents being created. Creating this too
large
# could result in excessive disk space usage.
#
HashExtentSize 49157

# HashMaxSeek: The maximum number of records to seek to insert a new
record
# before failing or adding a new extent. Setting this too high will
exhaustively
# scan each segment and kill performance. Typically, a low value is
acceptable
# as even older extents will continue to fill over time.
#
HashMaxSeek 100

# HashConcurrentUser: If you are using a single, stateful hash database
in
# daemon mode, specifying a concurrent user will cause the user to be
# permanently mapped into memory and shared via rwlocks.
#
#HashConcurrentUser user

# HashConnectionCache: If running in daemon mode, this is the max # of
# concurrent connections that will be supported. NOTE: If you are using
# HashConcurrentUser, this option is ignored, as all connections are
read-
# write locked instead of mutex locked.
HashConnectionCache 10

# LDAP: Perform various LDAP functions depending on LDAPMode variable.
# Presently, the only mode supported is 'verify', which will verify the
existence
# of an unknown user in LDAP prior to creating them as a new user in the
system.
# This is useful on some systems acting as gateway machines.
#
#LDAPMode verify
#LDAPHost ldaphost.mydomain.com
#LDAPFilter "(mail=%u)"
#LDAPBase ou=people,dc=domain,dc=com

# Optionally, you can specify storage profiles, and specify the server
to
# use on the commandline with --profile. For example:
#
#Profile DECAlpha
#MySQLServer.DECAlpha 10.0.0.1
#MySQLPort.DECAlpha 3306
#MySQLUser.DECAlpha dspam
#MySQLPass.DECAlpha changeme
#MySQLDb.DECAlpha dspam
#MySQLCompress.DECAlpha true
#
#Profile Sun420R
#MySQLServer.Sun420R 10.0.0.2
#MySQLPort.Sun420R 3306
#MySQLUser.Sun420R dspam
#MySQLPass.Sun420R changeme
#MySQLDb.Sun420R dspam
#MySQLCompress.Sun420R false
#
#DefaultProfile DECAlpha

#
# If you're using storage profiles, you can set failovers for each
profile.
# Of course, if you'll be failing over to another database, that
database
# must have the same information as the first. If you're using a global
# database with no training, this should be relatively simple. If you're
# configuring per-user data, however, you'll need to set up some type of
# replication between databases.
#
#Failover.DECAlpha SUN420R
#Failover.Sun420R DECAlpha

# If the storage fails, the agent will follow each profile's failover up
to
# a maximum number of failover attempts. This should be set to a maximum
of
# the number of profiles you have, otherwise the agent could loop and
try
# the same profile multiple times (unless this is your desired
behavior).
#
#FailoverAttempts 1

#
# Ignored headers: If DSPAM is behind other tools which may add a header
to
# incoming emails, it may be beneficial to ignore these headers -
especially
# if they are coming from another spam filter. If you are _not_ using
one of
# these tools, however, leaving the appropriate headers commented out
will
# allow DSPAM to use them as telltale signs of forged email.
#
#IgnoreHeader X-Spam-Status
#IgnoreHeader X-Spam-Scanned
#IgnoreHeader X-Virus-Scanner-Result

#
# Lookup: Perform lookups on streamlined blackhole list servers (see
# http://www.nuclearelephant.com/projects/sbl/). The streamlined
blacklist
# server is machine-automated, unsupervised blacklisting system designed
to
# provide real-time and highly accurate blacklisting based on network
spread.
# When performing a lookup, DSPAM will automatically learn the inbound
message
# as spam if the source IP is listed. Until an official public RABL
server is
# available, this feature is only useful if you are running your own
# streamlined blackhole list server for internal reporting among
multiple mail
# servers. Provide the name of the lookup zone below to use.
#
# This function performs standard reverse-octet.domain lookups, and
while it
# will function with many RBLs, it's strongly discouraged to use those
# maintained by humans as they're often inaccurate and could hurt filter
# learning and accuracy.
#
#Lookup "sbl.yourdomain.com"

#
# RBLInoculate: If you want to inoculate the user from RBL'd messages it
would
# have otherwise missed, set this to on.
#
#RBLInoculate off

#
# Notifications: Enable the sending of notification emails to users
(first
# message, quarantine full, etc.)
#
Notifications off

#
# Purge configuration: Set dspam_clean purge default options, if not
otherwise
# specified on the commandline
#
PurgeSignatures 14 # Stale signatures
PurgeNeutral 90 # Tokens with neutralish probabilities
PurgeUnused 90 # Unused tokens
PurgeHapaxes 30 # Tokens with less than 5 hits (hapaxes)
PurgeHits1S 15 # Tokens with only 1 spam hit
PurgeHits1I 15 # Tokens with only 1 innocent hit

#
# Purge configuration for SQL-based installations using purge.sql
#
#PurgeSignature off # Specified in purge.sql
#PurgeNeutral 90
#PurgeUnused off # Specified in purge.sql
#PurgeHapaxes off # Specified in purge.sql
#PurgeHits1S off # Specified in purge.sql
#PurgeHits1I off # Specified in purge.sql

#
# Local Mail Exchangers: Used for source address tracking, tells DSPAM
which
# mail exchangers are local and therefore should be ignored in the
Received:
# header when tracking the source of an email. Note: you should use the
address
# of the host as appears between brackets [ ] in the Received header.
#
LocalMX 127.0.0.1

#
# Logging: Disabling logging for users will make usage graphs
unavailable to
# them. Disabling system logging will make admin graphs unavailable.
#
SystemLog on
UserLog on

#
# TrainPristine: for systems where the original message remains server
side
# and can therefore be presented in pristine format for retraining. This
option
# will cause DSPAM to cease all writing of signatures and DSPAM headers
to the
# message, and deliver the message in as pristine format as possible.
This mode
# REQUIRES that the original message in its pristine format (as of
delivery)
# be presented for retraining, as in the case of webmail, imap, or other

# applications where the message is actually kept server-side during
reading,
# and is preserved. DO NOT use this switch unless the original message
can be
# presented for retraining with the ORIGINAL HEADERS and NO
MODIFICATIONS.
#
#TrainPristine on

#
# Opt: in or out; determines DSPAM's default filtering behavior. If this
value
# is set to in, users must opt-in to filtering by dropping a .dspam file
in
# /var/dspam/opt-in/user.dspam (or if you have homedirs configured, a
.dspam
# folder in their home directory). The default is opt-out, which means
all
# users will be filtered unless a .nodspam file is dropped in
# /var/dspam/opt-out/user.nodspam
#
Opt out

#
# TrackSources: specify which (if any) source addresses to track and
report
# them to syslog (mail.info). This is useful if you're running a
firewall or
# blacklist and would like to use this information. Spam reporting also
drops
# RABL blacklist files (see
http://www.nuclearelephant.com/projects/rabl/).
#
#TrackSources spam nonspam

#
# ParseToHeaders: In lieu of setting up individual aliases for each
user,
# DSPAM can be configured to automatically parse the To: address for
spam and
# false positive forwards. From there, it can be configured to either
set the
# DSPAM user based on the username specified in the header and/or change
the
# training class and source accordingly. The options below can be used
to
# customize most common types of header parsing behavior to avoid the
need for
# multiple aliases, or if using LMTP, aliases entirely..
#
# ParseToHeader: Parse the To: headers of an incoming message. This must
be
# set to 'on' to use either of the following features.
#
# ChangeModeOnParse: Automatically change the class (to spam or
innocent)
# depending on whether spam- or notspam- was specified, and change the
source
# to 'error'. This is convenient if you're not using aliases at all,
but
# are delivering via LMTP.
#
# ChangeUserOnParse: Automatically change the username to match that
specified
# in the To: header. For example, spam-bob@domain.tld will set the
username
# to bob, ignoring any --user passed in. This may not always be
desirable if
# you are using virtual email addresses as usernames. Options:
# on or user take the portion before the @ sign only
# full take everything after the initial
{spam,notspam}-.
#
ParseToHeaders on
ChangeModeOnParse on
ChangeUserOnParse off

#
# Broken MTA Options: Some MTAs don't support the proper functionality
# necessary. In these cases you can activate certain features in DSPAM
to
# compensate. 'returnCodes' causes DSPAM to return an exit code of 99 if
# the message is spam, 0 if not, or a negative code if an error has
occured.
# Specifying 'case' causes DSPAM to force the input usernames to
lowercase.
# Spceifying 'lineStripping' causes DSPAM to strip ^M's from messages
passed
# in.
#
#Broken returnCodes
#Broken case
#Broken lineStripping

#
# MaxMessageSize: You may specify a maximum message size for DSPAM to
process.
# If the message is larger than the maximum size, it will be delivered
# without processing. Value is in bytes.
#
#MaxMessageSize 4194304

#
# Virus Checking: If you are running clamd, DSPAM can perform
stream-based
# virus checking using TCP. Uncomment the values below to enable virus
# checking.
#
# ClamAVResponse: reject (reject or drop the message with a permanent
failure)
# accept (accept the message and quietly drop the
message)
# spam (treat as spam and quarantine/tag/whatever)
#
ClamAVPort 3310
ClamAVHost 127.0.0.1
ClamAVResponse spam

#
# Daemonized Server: If you are running DSPAM as a daemonized server
using
# --daemon, the following parameters will override the default. Use the
# ServerPass option to set up accounts for each client machine. The
DSPAM
# server will process and deliver the message based on the parameters
# specified. If you want the client machine to perform delivery, use
# the --stdout option in conjunction with a local setup.
#
#ServerPort 24
ServerQueueSize 32
ServerPID /var/run/dspam.pid

#
# ServerMode specifies the type of LMTP server to start. This can be one
of:
# dspam: DSPAM-proprietary DLMTP server, for communicating with
dspamc
# standard: Standard LMTP server, for communicating with Postfix or
other MTA
# auto: Speak both DLMTP and LMTP; auto-detect by ServerPass.IDENT
#
ServerMode standard

# If supporting DLMTP (dspam) mode, dspam clients will require
authentication
# as they will be passing in parameters. The idents below will be used
to
# determine which clients will be speaking DLMTP, so if you will be
using
# both LMTP and DLMTP from the same host, be sure to use something other
# than the server's hostname below (which will be sent by the MTA during
a
# standard LMTP LHLO).
#
#ServerPass.Relay1 "secret"
#ServerPass.Relay2 "password"

# If supporting standard LMTP mode, server parameters will need to be
specified
# here, as they will not be passed in by the mail server. The
ServerIdent
# specifies the 250 response code ident sent back to connecting clients
and
# should be set to the hostname of your server, or an alias.
#
# NOTE: If you specify --user in ServerParameters, the RCPT TO will be
# used only for delivery, and not set as the active user for
processing.
#
ServerParameters "--deliver=innocent"
ServerIdent "localhost.localdomain"

# If you wish to use a local domain socket instead of a TCP socket,
uncomment
# the following. It is strongly recommended you use local domain sockets
if
# you are running the client and server on the same machine, as it
eliminates
# much of the bandwidth overhead.
#
ServerDomainSocketPath "/tmp/dspam.sock"

#
# Client Mode: If you are running DSPAM in client/server mode, uncomment
and
# set these variables. A ClientHost beginning with a / will be treated
as
# a domain socket.
#
#ClientHost /tmp/dspam.sock
#ClientIdent "secret@Relay1"
#
#ClientHost 127.0.0.1
#ClientPort 24
#ClientIdent "secret@Relay1"

# RABLQueue: Touch files in the RABL queue
# If you are a reporting streamlined blackhole list participant, you can
# touch ip addresses within the directory the rabl_client process is
watching.
#
#RABLQueue /var/spool/rabl

# DataSource: If you are using any type of data source that does not
include
# email-like headers (such as documents), uncomment the line below. This
# will cause the entire input to be treated like a message "body"
#
#DataSource document

# ProcessorWordFrequency: By default, words are only counted once per
message.
# If you are classifying large documents, however, you may wish to count
once
# per occurrence instead.
#
#ProcessorWordFrequency occurrence

# ProcessorBias: Bias causes the filter to lean more toward 'innocent',
and
# usually greatly reduces false positives. It is the default behavior of
# most Bayesian filters (including dspam).
#
# NOTE: You probably DONT want this if you're using Markovian Weighting,
unless
# you are paranoid about false positives.
#
ProcessorBias on
Received on Wed Jul 5 19:56:42 2006